R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

795
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table statistic to display IPv6 BGP routing statistics.
Examples
# Display IPv6 BGP routing statistics.
<Sysname> display bgp ipv6 routing-table statistic
Total Number of Routes: 1
filter-policy export
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol process-id ]
undo filter-policy export [ protocol process-id ]
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
acl6-number: Specifies the number of an ACL6 used to match against the destination of routing
information. The number is in the range of 2000 to 3999.
ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against the destination of
routing information. The name is a string of 1 to 19 characters.
protocol: Filters routes redistributed from the routing protocol. It can be direct, isisv6, ospfv3, ripng, or
static. If no protocol is specified, all routes will be filtered when advertised.
process-id: Process ID of the routing protocol, in the range of 1 to 65535. It is available only when the
protocol is isisv6, ospfv3, or ripng.
Description
Use filter-policy export to filter outbound routes using a specified filter.
Use undo filter-policy export to cancel filtering outbound routes.
By default, no outbound routing information is filtered.
The following matrix shows the argument and firewall compatibility: