R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

804
Parameters
group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
as-path-acl-number: Number of an AS path ACL, in the range of 1 to 256.
import: Filters incoming routes.
export: Filters outgoing routes.
Description
Use peer as-path-acl to specify an AS path ACL to filter routes incoming from or outgoing to a peer/peer
group.
Use undo peer as-path-acl to remove the configuration.
By default, no AS path list is specified for filtering.
Examples
# Specify the AS path ACL 3 to filter routes outgoing to the peer 1:2::3:4.
<Sysname> system-view
[Sysname] ip as-path 3 permit ^200
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-path-acl 3 export
peer bfd (IPv6 address family view/IPv6 BGP-VPN instance
view)
Syntax
peer ipv6-address bfd
undo peer ipv6-address bfd
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
ip-address: IPv6 address of a peer.
Description
Use peer bfd to enable BFD over the link to a BGP peer.
Use undo peer bfd to restore the default.
By default, BFD is not enabled for any BGP peer.
The following matrix shows the command and firewall compatibility:
Command F1000-A-EI/S-EI F1000-E F5000 Firewall module
peer bfd No No Yes No