R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

811
description-text: Description information for the peer/peer group, a string of 1 to 79 characters.
Description
Use peer description to configure the description information for a peer/peer group.
Use undo peer description to remove the description information of a peer/peer group.
By default, no description information is configured for a peer (group).
You need create a peer/peer group before configuring a description for it.
Examples
# Configure the description for the peer group test as ISP1.
<Sysname] system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test description ISP1
peer ebgp-max-hop
Syntax
peer { ipv6-group-name | ipv6-address } ebgp-max-hop [ hop-count ]
undo peer { ipv6-group-name | ipv6-address } ebgp-max-hop
View
IPv6 address family view
Default level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
hop-count: Maximum hop count, in the range of 1 to 255. By default, the value is 64.
Description
Use peer ebgp-max-hop to allow establishing the EBGP connection to a peer/peer group indirectly
connected.
Use undo peer ebgp-max-hop to remove the configuration.
By default, this feature is disabled.
You can use the argument hop-count to specify the maximum router hops of the EBGP connection.
Examples
# Allow establishing the EBGP connection with the peer group test on an indirectly connected network.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test ebgp-max-hop