R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

823
undo peer { group-name | ipv6-address } route-policy route-policy-name { import | export }
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
route-policy-name: Name of a routing policy, a string of 1 to 63 characters.
import: Applies the routing policy to routes from the peer (group).
export: Applies the routing policy to routes sent to the peer (group).
Description
Use peer route-policy to apply a routing policy to routes incoming from or outgoing to a peer or peer
group.
Use undo peer route-policy to remove the configuration.
By default, no routing policy is specified for the peer (group).
The peer route-policy command does not use the if-match interface clause defined in the routing policy.
For related configuration, see "Routing policy configuration commands."
Examples
# Apply the routing policy test-policy to routes received from the peer group test.
<Sysname> system-view
[Sysname] route-policy test-policy permit node 10
[Sysname-route-policy] if-match cost 10
[Sysname-route-policy] apply cost 65535
[Sysname-route-policy] quit
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test route-policy test-policy import
peer route-policy (IPv6 BGP-VPN instance view)
Syntax
peer ipv6-address route-policy route-policy-name { export | import }
undo peer ipv6-address [ route-policy route-policy-name { export | import } ]
View
IPv6 BGP-VPN instance view
Default level
2: System level