R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

834
IPv6 IS-IS configuration commands
NOTE:
• This chapter describes only IPv6 IS-IS configuration commands, which supports all IPv4 IS-IS features
except that it advertises IPv6 routing information instead. For more information about IS-IS, see "IS-IS
configuration commands."
• The term "router" in this chapter refers to both routers and Layer 3 firewalls.
The following matrix shows the feature and firewall compatibility:
Feature F1000-A-EI/S-EI F1000-E F5000 Firewall module
IPv6 IS-IS No No Yes No
display isis route ipv6
Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ] * [ process-id | vpn-instance vpn-instance-name ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: IS-IS process ID, in the range 1 to 65535.
vpn-instance vpn-instance-name: Specifies an VPN. vpn-instance-name is a case-sensitive string of 1 to
31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.