R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

837
Table 202 Command output
Field Descri
p
tion
IPV6 Dest IPv6 destination.
Cost Value of cost.
Flag/Flags
Flag of routing information status:
• D—This is a direct route.
• R—The route has been added into the routing table.
• L—The route has been advertised in a LSP.
• U—Route leaking flag, indicating the Level-1 route is from Level-2. U means the route
will not be returned to Level-2.
Admin Tag Administrative tag.
Src Count Number of advertisement sources.
Next Hop Next hop.
Interface Outbound interface.
ExitIndex Outbound interface index.
ipv6 default-route-advertise
Syntax
ipv6 default-route-advertise [ [ level-1 | level-1-2 | level-2 ] | route-policy route-policy-name ] *
undo ipv6 default-route-advertise [ route-policy route-policy-name ]
View
IS-IS view
Default level
2: System level
Parameters
level-1: Specifies the default route as Level-1.
level-1-2: Specifies the default route as Level-1-2.
level-2: Specifies the default route as Level-2.
route-policy-name: Specifies the name of a routing policy with a case-sensitive string of 1 to 63
characters.
NOTE:
If no level is specified, the default route belongs to Level-2.
Description
Use ipv6 default-route-advertise to generate a Level-1 or Level-2 IPv6 IS-IS default route.
Use undo ipv6 default-route-advertise to disable generating a default route.
No IPv6 IS-IS default route is generated by default.