R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

838
With a routing policy, you can configure IPv6 IS-IS to generate the default route that must match the
routing policy. You can use the apply isis level-1 command in routing policy view to generate a default
route in L1 LSPs, or use the apply isis level-2 command in routing policy view to generate a default route
in L2 LSPs, and use the apply isis level-1-2 in routing policy view to generate a default route in L1 and L2
LSPs respectively.
Related commands: apply isis.
Examples
# Configure the router to generate a default route in Level-2 LSPs.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 default-route-advertise
ipv6 enable
Syntax
ipv6 enable
undo ipv6 enable
View
IS-IS view
Default level
2: System level
Parameters
None
Description
Use ipv6 enable to enable IPv6 for the IPv6 IS-IS process.
Use undo ipv6 enable to disable IPv6.
IPv6 is disabled by default.
Examples
# Create IS-IS routing process 1, and enable IPv6 for the process.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
ipv6 filter-policy export
Syntax
ipv6 filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } export
[ protocol [ process-id ] ]
undo ipv6 filter-policy export [ protocol [ process-id ] ]