R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

847
multiple-topology ipv6-unicast
Syntax
multiple-topology ipv6-unicast
undo multiple-topology ipv6-unicast
View
IS-IS view
Default level
2: System level
Parameters
None
Description
Use multiple-topology ipv6-unicast to enable IPv6 IS-IS MTR. This command enables separate route
calculation in IPv4 and IPv6 topologies.
Use undo multiple-topology ipv6-unicast to disable IPv6 IS-IS MTR.
By default, IPv6 IS-IS MTR is disabled.
Before configuring this command, you must enable IPv6 for the IS-IS process and set the cost style to wide,
wide-compatible, or compatible for the system.
Examples
# Enable IPv6 IS-IS MTR.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] multiple-topology ipv6-unicast