R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

848
IPv6 routing table displaying commands
NOTE:
The term "router" in this chapter refers to both routers and Layer 3 firewalls.
display ipv6 routing-table
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an VPN. vpn-instance-name is a case-sensitive string of 1 to
31 characters. If no VPN is specified, the information of the public network is displayed.
verbose: Displays detailed information about both active and inactive routes. Without this keyword, only
brief information about active routes is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipv6 routing-table to display brief IPv6 routing information, including destination IP address
and prefix, protocol type, priority, metric, next hop, and outgoing interface.
The command displays only active routes (the brief information about the current optimal routes).
Use display ipv6 routing-table verbose to display detailed information about all IPv6 routes, including
both active and inactive routes. The output shows the statistics of the entire routing table, and then the
detailed information of each route.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table : Public
Destinations : 1 Routes : 1
Destination: ::1/128 Protocol : Direct