R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

850
Field Descri
p
tion
Cost Cost of the route
Tunnel ID Tunnel ID
Label Label
Age Time that has elapsed since the route was generated
display ipv6 routing-table acl
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] acl acl6-number [ verbose ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an VPN. vpn-instance-name is a case-sensitive string of 1 to
31 characters. If no VPN is specified, the information of the public network is displayed.
acl6-number: Basic IPv6 ACL number, in the range of 2000 to 2999.
verbose: Displays both active and inactive verbose routing information permitted by the ACL. Without
this keyword, only brief active routing information is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipv6 routing-table acl to display routing information permitted by the IPv6 ACL.
If the specified IPv6 ACL is not available, all routing information is displayed.
Examples
# Display brief routing information permitted by ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list 2000 :
Summary Count : 2
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination : 1:1::/64 Protocol : Static