R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

861
If no policy name is specified, all the IPv6 PBR policy information is displayed. If a policy name is
specified, information about the specified policy is displayed.
Examples
# Display all IPv6 PBR policy information.
<Sysname> display ipv6 config policy-based-route
IPv6 Policy based routing configuration information:
policy-based-route : abc
Node 1 permit :
apply output-interface
GigabitEthernet0/1
Table 207 Command output
Field Description
IPv6 Policy based routing configuration information IPv6 policy information.
policy-based-route: abc Name of the referenced policy.
Node 1 permit : The matching mode of Node 1 is permit.
apply output-interface Outgoing interface specified for matched packets.
display ipv6 policy-based-route setup
Syntax
display ipv6 policy-based-route setup { policy-name | interface interface-type interface-number | local }
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
policy-name: Policy name, a string of 1 to 19 characters.
interface interface-type interface-number: Displays the IPv6 PBR routing information on the specified
interface.
local: Displays the IPv6 local PBR information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use display ipv6 policy-based-route setup to display the specified IPv6 PBR routing information.