R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

862
Examples
# Display the IPv6 PBR routing information of policy test.
<Sysname> display ipv6 policy-based-route setup test
policy Name interface
test local
# Display the IPv6 PBR routing information on interface GigabitEthernet 0/1.
<Sysname> display ipv6 policy-based-route setup interface gigabitethernet 0/1
Interface GigabitEthernet0/1 policy based routing configuration information:
policy-based-route: test
permit node 6:
if-match acl6 2000
apply ipv6-address next-hop
1::1
# Display the IPv6 local PBR information.
<Sysname> display ipv6 policy-based-route setup local
Local policy based routing configuration information:
policy-based-route: test
permit node 6:
if-match acl6 2000
apply ipv6-address next-hop
1::1
Table 208 Command output
Field Description
policy Name Policy name.
interface
Interface where the policy is applied. Local means the policy is
applied locally.
Interface GigabitEthernet0/1 policy
based routing configuration information
IPv6 PBR routing information on interface GigabitEthernet 0/1.
Local policy based routing configuration
information
IPv6 local PBR information.
policy-based-route Name of the referenced policy.
permit node 6 The match mode of Node 6 is permit.
if-match acl6 2000 Match IPv6 packets against ACL 2000.
apply ipv6-address next-hop Permitted IPv6 packets are sent to the specified next hop.
display ipv6 policy-based-route statistics
Syntax
display ipv6 policy-based-route statistics { interface interface-type interface-number | local } [ | { begin
| exclude | include } regular-expression ]
View
Any view