R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

863
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays IPv6 PBR statistics on the specified interface.
local: Displays IPv6 local PBR statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use display ipv6 policy-based-route statistics to display IPv6 PBR statistics.
Examples
# Display IPv6 local PBR statistics.
<Sysname> display ipv6 policy-based-route statistics local
Local policy based routing statistics information:
ipv6 policy-based-route: test
permit node 10:
if-match acl6 2000
apply output-interface:
GigabitEthernet0/1
matched: 50
Total matched: 50
Table 209 Command output
Field Description
Local policy based routing information Local PBR information
ipv6 policy-based-route Name of the referenced policy
permit node The matching mode of the node is permit.
if-match acl6 2000 Match IPv6 packets against IPv6 basic ACL 2000
apply output-interface Outgoing interface specified for matching packets
matched Total number of matching packets on the node
Total matched Total number of matching packets on all nodes
if-match acl6
Syntax
if-match acl6 acl6-number
undo if-match acl6