R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

877

Use undo multicast ipv6 forwarding-table route-limit to restore the default.

By default, the upper limit is 4096.

The allowable maximum number of entries varies with devices.

Related commands: display multicast ipv6 forwarding-table.

Examples

# Set the maximum number of entries in the IPv6 multicast forwarding table to 200.

<Sysname> system-view

[Sysname] multicast ipv6 forwarding-table route-limit 200

multicast ipv6 load-splitting

Syntax

multicast ipv6 load-splitting {source | source-group }

undo multicast ipv6 load-splitting

View

System view

Default level

2: System level

Parameters

source: Specifies to implement IPv6 multicast load splitting on a per-source basis.

source-group: Specifies to implement IPv6 multicast load splitting on a per-source and per-group basis.

Description

Use multicast ipv6 load-splitting to enable load splitting of IPv6 multicast traffic.

Use undo multicast ipv6 load-splitting to disable load splitting of IPv6 multicast traffic.

By default, load splitting of IPv6 multicast traffic is disabled.

Examples

# Enable load splitting of IPv6 multicast traffic on a per-source basis.