R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

890
Examples
# Configure a C-RP policy so that only devices in the IPv6 address range of 2001::2/64 can be C-RPs
that serve IPv6 multicast groups in the address range of FF03::101/64.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule permit ipv6 source 2001::2 64 destination ff03::101 64
[Sysname-acl6-adv-3000] quit
[Sysname] pim ipv6
[Sysname-pim6] crp-policy 3000
display pim ipv6 bsr-info
Syntax
display pim ipv6 bsr-info [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim ipv6 bsr-info to view the BSR information in the IPv6 PIM domain and the locally
configured C-RP information in effect.
Related commands: c-bsr and c-rp.
Examples
# Display the BSR information in the IPv6 PIM-SM domain and the locally configured C-RP information in
effect.
<Sysname> display pim ipv6 bsr-info
Elected BSR Address: 2004::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Uptime: 00:01:10
Next BSR message scheduled at: 00:00:48
Candidate BSR Address: 2004::2
Priority: 64
Hash mask length: 126