R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

892
Default level
1: Monitor level
Parameters
ipv6-source-address: Displays information about the IPv6 unicast route to a particular IPv6 multicast
source. If you do not provide this argument, this command will display the information about all IPv6
unicast routes used by IPv6 PIM.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim ipv6 claimed-route to display information about IPv6 unicast routes used by IPv6 PIM.
If an (S, G) is marked SPT, this (S, G) entry uses an IPv6 unicast route.
Examples
# Display information about all IPv6 unicast routes used by IPv6 PIM.
<Sysname> display pim ipv6 claimed-route
RPF information about: 2001::2
RPF interface: GigabitEthernet0/1, RPF neighbor: FE80::A01:100:1
Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
RPF-route selecting rule: preference-preferred
The (S, G) or (*, G) list dependent on this route entry
(2001::2, FF03::101)
Table 217 Command output
Field Descri
p
tion
RPF information about: 2001::2
Information about the RPF route to IPv6 multicast
source 2001::2
RPF interface RPF interface type and number
RPF neighbor IPv6 address of the RPF neighbor
Referenced prefix/prefix length Address/mask of the reference route
Referenced route type
Type of the referenced route:
• igp—IGP IPv6 unicast route
• egp—EGP IPv6 unicast route
• unicast (direct)—Direct IPv6 unicast route
• unicast—Other IPv6 unicast route (such as IPv6
static unicast route)
• mbgp—IPv6 MBGP route