R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

901
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16, where
x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Prefix length of the IPv6 multicast group/source address prefix. For an IPv6 multicast group
address, the effective range is 8 to 128 and the default value is 128. For an IPv6 multicast source address,
the effective range is 0 to 128 and the default value is 128.
incoming-interface: Displays routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Displays routing entries that contain the specified interface as the outgoing interface.
include: Displays routing entries of which the outgoing interface list includes the specified interface.
exclude: Displays routing entries of which the outgoing interface list excludes the specified interface.
match: Displays routing entries of which the outgoing interface list includes only the specified interface.
mode mode-type: Specifies an IPv6 PIM mode, where mode-type can have the following values:
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
• ssm: Specifies IPv6 PIM-SSM.
flags flag-value: Displays IPv6 PIM routing entries containing the specified flag or flags. The values of
flag-value and their meanings are as follows:
• act: Specifies IPv6 multicast routing entries that have been used for routing data.
• del: Specifies IPv6 multicast routing entries scheduled to be deleted.
• exprune: Specifies multicast routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
• ext: Specifies IPv6 routing entries containing outgoing interfaces provided by other IPv6 multicast
routing protocols.
• loc: Specifies IPv6 multicast routing entries on that devices that directly connect to the same subnet
as the IPv6 multicast source.
• niif: Specifies IPv6 multicast routing entries containing unknown incoming interfaces.
• nonbr: Specifies routing entries with IPv6 PIM neighbor searching failure.
• rpt: Specifies routing entries on RPT branches where (S, G) prunes have been sent to the RP.
• spt: Specifies routing entries on the SPT.
• swt: Specifies routing entries in the process of RPT-to-SPT switchover.
• wc
: Specifies wildcard routing entries.
fs
m: Displays information about the state machine.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.