R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

912
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 bsr-boundary to configure an IPv6 PIM domain border, namely, a bootstrap message
boundary.
Use undo pim ipv6 bsr-boundary to remove the configured IPv6 PIM domain border.
By default, no PIM domain border is configured.
Related commands: c-bsr and multicast ipv6 boundary.
Examples
# Configure GigabitEthernet 0/1 as a PIM domain border.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 bsr-boundary
pim ipv6 dm
Syntax
pim ipv6 dm
undo pim ipv6 dm
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 dm to enable IPv6 PIM-DM.
Use undo pim ipv6 dm to disable IPv6 PIM-DM.
By default, IPv6 PIM-DM is disabled.
This command can take effect only after IPv6 multicast routing is enabled on the device.
IPv6 PIM-DM cannot be used for IPv6 multicast groups in the IPv6 SSM group range.
Related commands: pim ipv6 sm, ssm-policy, and multicast ipv6 routing-enable.
Examples
# Enable IPv6 multicast routing, and enable IPv6 PIM-DM on GigabitEthernet 0/1.
<Sysname> system-view