R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

913
[Sysname] multicast ipv6 routing-enable
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 dm
pim ipv6 hello-option dr-priority
Syntax
pim ipv6 hello-option dr-priority priority
undo pim ipv6 hello-option dr-priority
View
Interface view
Default level
2: System level
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value means a higher
priority.
Description
Use pim ipv6 hello-option dr-priority to configure the router priority for DR election on the current
interface.
Use undo pim ipv6 hello-option dr-priority to restore the default.
By default, the router priority for DR election is 1.
Related commands: hello-option dr-priority.
Examples
# Set the router priority for DR election to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option dr-priority 3
pim ipv6 hello-option holdtime
Syntax
pim ipv6 hello-option holdtime interval
undo pim ipv6 hello-option holdtime
View
Interface view
Default level
2: System level
Parameters
interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. 65,535
makes the PIM neighbor always reachable.