R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

914
Description
Use pim ipv6 hello-option holdtime to configure the PIM neighbor timeout time on the current interface.
Use undo pim ipv6 hello-option holdtime to restore the default.
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
Related commands: hello-option holdtime.
Examples
# Set the IPv6 PIM neighbor timeout time to 120 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option holdtime 120
pim ipv6 hello-option lan-delay
Syntax
pim ipv6 hello-option lan-delay interval
undo pim ipv6 hello-option lan-delay
View
Interface view
Default level
2: System level
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use pim ipv6 hello-option lan-delay to configure the LAN-delay time, namely, the time that the device
waits before forwarding a received prune message, on the current interface.
Use undo pim ipv6 hello-option lan-delay to restore the default.
By default, the LAN-delay time is 500 milliseconds.
Related commands: hello-option lan-delay, hello-option override-interval, and pim ipv6 hello-option
override-interval.
Examples
# Set the LAN-delay time to 200 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option lan-delay 200
pim ipv6 hello-option neighbor-tracking
Syntax
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking