R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

915
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 hello-option neighbor-tracking to disable join suppression, namely, to enable neighbor
tracking, on the current interface.
Use undo pim ipv6 hello-option neighbor-tracking to enable join suppression.
By default, join suppression is enabled. Namely, neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
Examples
# Disable join suppression on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Syntax
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
View
Interface view
Default level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use pim ipv6 hello-option override-interval to configure the prune override interval on the current
interface.
Use undo pim ipv6 hello-option override-interval to restore the default.
By default, the prune override interval is 2,500 milliseconds.
Related commands: hello-option lan-delay, hello-option override-interval, and pim ipv6 hello-option
lan-delay.
Examples
# Set the prune override interval to 2,000 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1