R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

919
pim ipv6 state-refresh-capable
Syntax
pim ipv6 state-refresh-capable
undo pim ipv6 state-refresh-capable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 state-refresh-capable to enable the state fresh feature on the interface.
Use undo pim ipv6 state-refresh-capable to disable the state fresh feature.
By default, the state refresh feature is enabled.
Related commands: state-refresh-hoplimit, state-refresh-interval, and state-refresh-rate-limit.
Examples
# Disable state refresh on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo pim ipv6 state-refresh-capable
pim ipv6 timer graft-retry
Syntax
pim ipv6 timer graft-retry interval
undo pim ipv6 timer graft-retry
View
Interface view
Default level
2: System level
Parameters
interval: Graft retry period in seconds, with an effective range of 1 to 65,535.
Description
Use pim ipv6 timer graft-retry to configure the graft retry period.
Use undo pim ipv6 timer graft-retry to restore the default.
By default, the graft retry period is 3 seconds.
Examples
# Set the graft retry period to 80 seconds on GigabitEthernet 0/1.