R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

922
Default level
2: System level
Parameters
interval: Register probe time in seconds, with an effective range of 1 to 1799.
Description
Use probe-interval to configure the register probe time.
Use undo probe-interval to restore the default.
By default, the register probe time is 5 seconds.
Related commands: register-suppression-timeout.
Examples
# Set the register probe time to 6 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] probe-interval 6
prune delay (IPv6 PIM view)
Syntax
prune delay interval
undo prune delay
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Prune delay time in the range 1 to 128 seconds.
Description
Use prune delay to configure the prune delay time, namely, the length of time that the device waits
between receiving a prune message and taking a prune action.
Use undo prune delay to restore the default.
By default, the prune delay time is 3 seconds, which equals the prune pending time.
Examples
# Set the prune delay time to 75 seconds in the public network.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] prune delay 75