R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

925
Parameters
interface-type interface-number: Specifies to reset the IPv6 PIM control message counter on a particular
interface. If no interface is specified, this command will clear the statistics information about IPv6 PIM
control messages on all interfaces.
Description
Use reset pim ipv6 control-message counters to reset IPv6 PIM control message counters.
Examples
# Reset IPv6 PIM control message counters on all interfaces.
<Sysname> reset pim ipv6 control-message counters
source-lifetime (IPv6 PIM view)
Syntax
source-lifetime interval
undo source-lifetime
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: IPv6 multicast source lifetime in seconds, with an effective range of 1 to 31,536,000.
Description
Use source-lifetime to configure the IPv6 multicast source lifetime.
Use undo source-lifetime to restore the default.
By default, the lifetime of an IPv6 multicast source is 210 seconds.
Examples
# Set the IPv6 multicast source lifetime to 200 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] source-lifetime 200
source-policy (IPv6 PIM view)
Syntax
source-policy acl6-number
undo source-policy
View
IPv6 PIM view
Default level
2: System level