R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

930
View
IPv6 PIM view
Default level
2: System level
Parameters
ipv6-rp-address: IPv6 address of the static RP to be configured. This address must be a real, valid,
globally scoped IPv6 unicast address. For a static RP serving IPv6 BIDIR-PIM, you can specify a virtual
IPv6 address.
acl6-number: Basic IPv6 ACL number, in the range of 2000 to 2999. If you provide this argument, the
configured static RP will serve only those IPv6 multicast groups that pass the filtering. Otherwise, the
configured static RP will serve the all IPv6 multicast groups.
preferred: Specifies to give priority to the static RP if the static RP conflicts with the dynamic RP. If you do
not include the preferred keyword in your command, the dynamic RP will be given priority, and the static
RP takes effect only if no dynamic RP exists in the network or when the dynamic RP fails.
Description
Use static-rp to configure a static RP.
Use undo static-rp to configure a static RP.
By default, no static RP is configured.
IPv6 PIM-SM or IPv6 PIM-DM cannot be enabled on an interface that serves as a static RP.
When the IPv6 ACL rule applied on a static RP changes, a new RP must be elected for all IPv6 multicast
groups.
You can configure multiple static RPs by carrying out this command repeatedly. However, if you execute
this command multiple times and specify the same static RP address or reference the same IPv6 ACL rule,
the last configuration will override the previous one. If multiple static RPs have been configured for the
same IPv6 multicast group, the one with the highest IPv6 address will be chosen to serve the group.
You can configure up to 50 static RPs on the same device.
Related commands: display pim ipv6 rp-info.
Examples
# Configure the interface with an IPv6 address of 2001::2 as a static RP to serve the IPv6 multicast groups
in the address range of FF03::101/64 defined in IPv6 ACL 2001, and give priority to this static RP in the
case of static/dynamic RP conflict.
<Sysname> system-view
[Sysname] acl ipv6 number 2001
[Sysname-acl6-basic-2001] rule permit source ff03::101 64
[Sysname-acl6-basic-2001] quit
[Sysname] pim ipv6
[Sysname-pim6] static-rp 2001::2 2001 preferred
timer hello (IPv6 PIM view)
Syntax
timer hello interval