R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

931
undo timer hello
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use timer hello to configure the hello interval globally.
Use undo timer hello to restore the default.
By default, hello messages are sent at the interval of 30 seconds.
Related commands: pim ipv6 timer hello.
Examples
# Set the global hello interval to 40 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer hello 40
timer join-prune (IPv6 PIM view)
Syntax
timer join-prune interval
undo timer join-prune
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use timer join-prune to configure the join/prune interval globally.
Use undo timer join-prune to restore the default.
By default, the join/prune interval is 60 seconds.
Related commands: pim ipv6 timer join-prune.
Examples
# Set the global join/prune interval to 80 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer join-prune 80