R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

932
MLD configuration commands
display mld group
Syntax
display mld group [ ipv6-group-address | interface interface-type interface-number ] [ static | verbose ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: MLD group address, in the range of FFxy::/16 (excluding FFx0::/16, FFx1::/16,
FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to F. If you do
not specify any IPv6 multicast group address, this command displays information about all MLD groups.
interface interface-type interface-number: Displays information about MLD groups on the specified
interface. If you do not specify interface-type interface-number, the command displays the MLD group
information on all the interfaces.
static: Displays information about static MLD group entries. If you do not specify this keyword, the
command displays the dynamic MLD group entries.
verbose: Displays detailed information of MLD groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld group to view information of MLD groups.
Examples
# View the detailed information of dynamically added MLD groups on all interfaces.
<Sysname> display mld group verbose
Interface group report information
GigabitEthernet0/1(FE80::101)
Total 1 MLD Groups reported
Group: FF03::101
Uptime: 00:01:46
Expires: 00:01:30
Last reporter: FE80::10