R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

939
Protocol: MLD
00002. (100::1, FF1E::101), Flag: ACT
List of 1 downstream interface in include mode
GigabitEthernet0/2 (FE80::100:5E16:FEC0:1010),
Protocol: MLD
Table 229 Command output
Field Descri
p
tion
Routing table MLD routing table.
00001 Sequence number of this (*, G) entry.
(*, FF1E::101) (*, G) entry in the MLD routing table.
Flag
MLD route flags:
• ACT—Indicates MLD routing entries that have been used for
forwarding data packets but have the multicast group address
out of the SSM group range.
• SUC—Indicates MLD routing entries that have been added to the
forwarding table and have the multicast group address within
the SSM group range.
List of 1 downstream interface
List of downstream interfaces: namely the interfaces to which
multicast data for this group will be forwarded.
in include mode The downstream interface is in the include mode.
in exclude mode The downstream interface is in the exclude mode.
Downstream interface is none No downstream interfaces exist.
Protocol Protocol type.
display mld ssm-mapping
Syntax
display mld ssm-mapping ipv6-group-address [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal
number ranging from 0 to F.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.