R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

940
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld ssm-mapping to view the configured MLD SSM mappings for the specified IPv6
multicast group.
Related commands: ssm-mapping.
Examples
# View the MLD SSM mappings for multicast group FF1E::101.
<Sysname> display mld ssm-mapping ff1e::101
Group: FF1E::101
Source list:
1::1
1::2
10::1
100::10
Table 230 Command output
Field Descri
p
tion
Group IPv6 multicast group address
Source list List of IPv6 multicast source addresses
display mld ssm-mapping group
Syntax
display mld ssm-mapping group [ ipv6-group-address | interface interface-type interface-number ]
[ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies a multicast group by its IPv6 address, in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number
ranging from 0 to F. If you do not specify any IPv6 multicast group, this command displays information
about all IPv6 multicast groups created based on the configured MLD SSM mappings.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify any
interface, this command displays the multicast group information created based on the configured MLD
SSM mappings on all interfaces.
verbose: Displays the detailed multicast group information created based on the configured MLD SSM
mappings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.