R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

943

Field Descri

tion

Host Host IPv6 address

Uptime Host running duration

Expires Host expiration time, where timeout means that the host has expired.

fast-leave (MLD view)

Syntax

fast-leave [ group-policy acl6-number ]

undo fast-leave

View

MLD view

Default level

2: System level

Parameters

acl6-number: Number of a basic IPv6 ACL, in the range of 2000 to 2999. If you do not include this

option in your command, this command takes effect for all IPv6 multicast groups.

Description

Use fast-leave to configure MLD fast-leave processing globally.

Use undo fast-leave to disable MLD fast-leave processing globally.

By default, MLD fast-leave processing is disabled. That is, the MLD querier sends

multicast-address-specific queries or multicast-address-and-source-specific queries after receiving an MLD

done message from a host, instead of sending a leave notification directly to the upstream.

When this command is executed in MLD view, this command takes effect only on Layer 3 interfaces

except VLAN interfaces.

Related commands: last-listener-query-interval and mld fast-leave.

Examples

# Enable MLD fast-leave processing globally.

<Sysname> system-view

[Sysname] mld

[Sysname-mld] fast-leave

host-tracking (MLD view)

Syntax

host-tracking

undo host-tracking

View

MLD view