R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

950
Examples
# Set the MLD last listener query interval to 3 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld last-listener-query-interval 3
mld max-response-time
Syntax
mld max-response-time interval
undo mld max-response-time
View
Interface view
Default level
2: System level
Parameters
interval: Maximum response delay for MLD general query messages in seconds, in the range of 1 to 25.
Description
Use mld max-response-time to configure the maximum response delay for MLD general query messages
on the interface.
Use undo mld max-response-time to restore the default.
By default, the maximum response delay for MLD general query messages is 10 seconds.
The maximum response delay determines the time which the device takes to detect directly attached
group members in the LAN.
Related commands: display mld interface, max-response-time, and mld timer other-querier-present.
Examples
# Set the maximum response delay for MLD general query messages to 8 seconds on GigabitEthernet
0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld max-response-time 8
mld proxying enable
Syntax
mld proxying enable
undo mld proxying enable
View
Interface view
Default level
2: System level