R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

954
mld ssm-mapping enable
Syntax
mld ssm-mapping enable
undo mld ssm-mapping enable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use mld ssm-mapping enable to enable the MLD SSM mapping feature on the current interface.
Use undo mld ssm-mapping enable to disable the MLD SSM mapping feature on the current interface.
By default, the MLD SSM mapping feature is disabled on all interfaces.
Examples
# Enable the MLD SSM mapping feature on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld ssm-mapping enable
mld startup-query-count
Syntax
mld startup-query-count value
undo mld startup-query-count
View
Interface view
Default level
2: System level
Parameters
value: Startup query count, namely, the number of queries that the MLD querier sends on startup, with an
effective range of 2 to 5.
Description
Use mld startup-query-count to configure the startup query count on the current interface.
Use undo mld startup-query-count to restore the default.
By default, the startup query count is set to the MLD querier's robustness variable.
Related commands: mld robust-count and startup-query-count.