R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

957
By default, MLD other querier present interval = [ MLD query interval ] × [ MLD querier's robustness
variable ] + [ maximum response delay for MLD general queries ] /2.
Related commands: display mld interface, mld max-response-time, mld robust-count, mld timer query,
and timer other-querier-present.
Examples
# Set the MLD other querier present interval to 200 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld timer other-querier-present 200
mld timer query
Syntax
mld timer query interval
undo mld timer query
View
Interface view
Default level
2: System level
Parameters
interval: MLD query interval, namely, the amount of time in seconds between MLD general query
messages, in the range of 1 to 18,000.
Description
Use mld timer query to configure the MLD query interval on the current interface.
Use undo mld timer query to restore the default.
By default, the MLD query interval is 125 seconds.
Related commands: display mld interface, mld timer other-querier-present, and timer query.
Examples
# Set the MLD query interval to 200 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld timer query 200
mld version
Syntax
mld version version-number
undo mld version
View
Interface view