R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

962
View
MLD view
Default level
2: System level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number ranging from 0 to F.
prefix-length: Prefix length of the IPv6 multicast group address, in the range of 8 to 128.
ipv6-source-address: Specifies a multicast source by its IPv6 address.
all: Removes all MLD SSM mappings.
Description
Use ssm-mapping to configure an MLD SSM mapping.
Use undo ssm-mapping to remove one or all MLD SSM mappings.
By default, no MLD SSM mappings are configured.
Related commands: display mld ssm-mapping and mld ssm-mapping enable.
Examples
# Configure an MLD SSM mapping for multicast groups in the range of FF1E::/64 and multicast source
1: :1.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] ssm-mapping ff1e:: 64 1::1
startup-query-count (MLD view)
Syntax
startup-query-count value
undo startup-query-count
View
MLD view
Default level
2: System level
Parameters
value: Startup query count, namely, the number of queries that the MLD querier sends on startup, with an
effective range of 2 to 5.
Description
Use startup-query-count to configure the startup query count globally.
Use undo startup-query-count to restore the default.
By default, the startup query count is set to the MLD querier's robustness variable.
Related commands: mld startup-query-count and robust-count.