R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

963
Examples
# Set the startup query count to 3 globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-count 3
startup-query-interval (MLD view)
Syntax
startup-query-interval interval
undo startup-query-interval
View
MLD view
Default level
2: System level
Parameters
interval: Startup query interval in seconds, namely, the interval between general queries that the MLD
querier sends on startup, with an effective range of 1 to 18000.
Description
Use startup-query-interval to configure the startup query interval globally.
Use undo startup-query-interval to restore the default.
By default, the startup query interval is 1/4 of the "MLD query interval".
Related commands: mld startup-query-interval and timer query.
Examples
# Set the startup query interval to 5 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-interval 5
timer other-querier-present (MLD view)
Syntax
timer other-querier-present interval
undo timer other-querier-present
View
MLD view
Default level
2: System level
Parameters
interval: MLD other querier present interval in seconds, in the range of 60 to 300.