R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

972
[Sysname-route-policy] if-match route-type external-type1or2
[Sysname-route-policy] apply preference 90
apply preferred-value
Syntax
apply preferred-value preferred-value
undo apply preferred-value
View
Routing policy view
Default level
2: System level
Parameters
preferred-value: Preferred value, in the range of 0 to 65535.
Description
Use apply preferred-value to set a preferred value for BGP routes.
Use undo apply preferred-value to remove the clause configuration.
No preferred value is set for BGP routes by default.
Examples
# Configure node 10 in permit mode of routing policy policy1: Set a preferred value of 66 for BGP
routing information matching AS-PATH list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply preferred-value 66
apply tag
Syntax
apply tag value
undo apply tag
View
Routing policy view
Default level
2: System level
Parameters
value: Tag value, in the range of 0 to 4294967295.
Description
Use apply tag to set a specified tag value for RIP, OSPF, or IS-IS routing information.
Use undo apply tag to remove the clause configuration.