R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

135
Resetting or terminating a PPPoE session
To reset/terminate a PPPoE session:
Ste
p
Command Remarks
1. Reset a PPPoE session on a
PPPoE client.
reset pppoe-client { all |
dial-bundle-number number }
Available in user view
2. Terminate a PPPoE session on
a PPPoE client.
undo pppoe-client dial-bundle-number
number
Available in Ethernet
interface view or virtual
Ethernet interface view
Displaying and maintaining PPPoE
Task Command Remarks
Display the statistics and state
information about a PPPoE client.
display pppoe-client session
{
packet
|
summary
} [
dial-bundle-number
number ] [
|
{
begin
|
exclude
|
include
}
regular-expression ]
Available in any view
PPPoE client configuration example at the CLI
Network requirements
As shown in Figure 73, configure the router to authenticate the Firewall by using PAP or CHAP.
Figure 73 Network diagram
Configuration procedure
Configuring PAP authentication
1. Configure Router as the PPPoE server
# Add a PPPoE user.
<Router> system-view
[Router] local-user user2
[Router-luser-user2] password simple hello
[Router-luser-user2] service-type ppp
[Router-luser-user2] quit
# Configure virtual template 1.
[Router] interface virtual-template 1
[Router-Virtual-Template1] ppp authentication-mode pap