R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

151

152

153

154

155

156

157

158

159

160

Table Of Contents

136

[Router-Virtual-Template1] ip address 1.1.1.1 255.0.0.0

[Router-Virtual-Template1] remote address 1.1.1.2

[Router-Virtual-Template1] quit

# Configure the PPPoE server.

[Router] interface GigabitEthernet 0/1

[Router- GigabitEthernet 0/1] pppoe-server bind virtual-template 1

2. Configure Firewall as the PPPoE client.

<Firewall> system-view

[Firewall] dialer-rule 1 ip permit

[Firewall] interface dialer 1

[Firewall-Dialer1] dialer user user2

[Firewall-Dialer1] dialer-group 1

[Firewall-Dialer1] dialer bundle 1

[Firewall-Dialer1] ip address ppp-negotiate

[Firewall-Dialer1] ppp pap local-user user2 password simple hello

[Firewall-Dialer1] quit

# Configure the PPPoE session.

[Firewall] interface GigabitEthernet 0/1

[Firewall- GigabitEthernet 0/1] pppoe-client dial-bundle-number 1

Configuring CHAP authentication

1. Configure Router as the PPPoE server

# Add a PPPoE user.

<Router> system-view

[Router] local-user user2

[Router-luser-user2] password simple hello

[Router-luser-user2] service-type ppp

[Router-luser-user2] quit

# Configure virtual template 1.

[Router] interface virtual-template 1

[Router-Virtual-Template1] ppp authentication-mode chap

[Router-Virtual-Template1] ppp chap user user1