R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

162
• The IP addresses of GigabitEthernet 0/1 and GigabitEthernet 0/2 on the Firewall are 10.1.1.1/25
a n d 10 .1.1.12 9 / 2 5 r e s p e c t i v e l y.
• Address pool 10.1.1.0/25 has the address lease duration ten days and twelve hours, domain name
suffix aabbcc.com, DNS server address 10.1.1.2/25, WINS server address 10.1.1.4/25, and
gateway address 10.1.1.126/25.
• Address pool 10.1.1.128/25 has the address lease duration five days, domain name suffix
aabbcc.com, DNS server address 10.1.1.2/25, and gateway address 10.1.1.254/25 and has no
WINS server address.
• The domain name suffix and DNS server address in address pools 10.1.1.0/25 and 10.1.1.128/25
are the same. Therefore, the domain name suffix and DNS server address need to be configured
o n l y f o r s u b n e t 10 .1.1. 0 / 24 . S u b n e t 10 .1.1. 0 / 2 5 a n d 10 .1.1.12 8 / 2 5 c a n i n h e r i t t h e c o n f i g u r a t i o n o f
s u b n e t 10 .1.1. 0 / 2 4 .
NOTE:
In this example, the number of requesting clients connected to GigabitEthernet 0/1 should be less than
122, and that of clients connected to GigabitEthernet 0/2 should be less than 124.
Figure 97 Network diagram
Configuration procedure
# Specify IP addresses for interfaces and create security zones. (Details not shown.)
# Configure the DHCP server
• Select Network > DHCP > DHCP Server from the navigation tree and perform the following
configuration, as shown in Figure 98.