R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

244
Creating a static ARP entry
Select Firewall > ARP Management > ARP Table from the navigation tree to enter the page shown
in Figure 152. Clic
k Add to enter the New Static ARP Entry page, as shown in Figure 153.
Figure 153 Adding a static ARP entry
Table 43 Configuration items
Item Descri
p
tion
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.
Advanced
Options
VLAN ID
Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the port
must belong to the VLAN. The corresponding VLAN interface must have been
created.
Port
VPN
Instance
Enter the name of the VPN instance to which the static ARP entry belongs.
Enabling dynamic ARP learning
Select Firewall > ARP Management > Dynamic Entry from the navigation tree to enter the configuration
page, as shown in Figure 154.