R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

245
Figure 154 Dynamic entry management page
• Click Disable all to disable all interfaces in the list from learning dynamic ARP entries.
• Select the boxes in front of the interfaces and click Disable selected to disable the selected
interfaces from learning dynamic ARP entries.
• Click Enable all to enable all interfaces in the list to learn dynamic ARP entries.
• Select the boxes in front of the interfaces and click Enable selected to enable the selected interfaces
to learn dynamic ARP entries.
• Click of an interface to enter the configuration page as shown in Figure 155. You
can modify
the maximum number of dynamic ARP entries the interface can learn. If it is set to 0, the interface
is not allowed to learn dynamic ARP entries.
Figure 155 Modifying interface configuration
NOTE:
A
fter you enable dynamic ARP learning on an interface as shown in Figure 154, the maximum number of
A
RP entries that the interface can learn is restored to the default. By default, an interface can learn up to
4
096 dynamic ARP entries.