R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

533
Configuring local PBR
Only one policy can be referenced for local PBR.
To configure local PBR:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure local PBR.
ip local policy-based-route
policy-name
Not configured by default.
NOTE:
If the specified policy does not exist, the local PBR configuration succeeds, but it takes effect only when the
policy is created.
Configuring interface PBR
Only one policy can be referenced by an interface for interface PBR.
To configure interface PBR:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure interface PBR.
ip policy-based-route policy-name Not configured by default.
NOTE:
If the specified policy does not exist, the interface PBR configuration succeeds, but it takes effect only when
the policy is created.
Displaying and maintaining PBR configuration
Task Command Remarks
Display the PBR routing
information.
display ip policy-based-route [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the specified PBR routing
information.
display ip policy-based-route setup
{ interface interface-type interface-number |
local | policy-name } [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display PBR statistics.
display ip policy-based-route statistics
{ interface interface-type interface-number |
local } [ | { begin | exclude | include }
regular-expression ]
Available in any view