R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

744
Configuration procedure
To apply an IPsec policy in an area:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPFv3 view. ospfv3 [ process-id ] N/A
3. Enter OSPF area view.
area area-id N/A
4. Apply an IPsec policy in the
area.
enable ipsec-policy policy-name Not configured by default.
To apply an IPsec policy on an interface:
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Apply an IPsec policy on the
interface.
ospfv3 ipsec-policy policy-name
[ instance instance-id ]
Not configured by default.
To apply an IPsec policy on a virtual link:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPFv3 view. ospfv3 [ process-id ] N/A
3. Enter OSPF area view.
area area-id N/A
4. Apply an IPsec policy on a
virtual link.
vlink-peer router-id [ hello seconds |
retransmit seconds | trans-delay
seconds | dead seconds | instance
instance-id | ipsec-policy policy-name ]
*
Not configured by default.
Displaying and maintaining OSPFv3
Task Command Remarks
Display OSPFv3 process brief
information.
display ospfv3 [ process-id ] [ | { begin | exclude |
include } regular-expression ]
Available in
any view
Display OSPFv3 interface
information.
display ospfv3 interface [ interface-type
interface-number | statistic ] [ | { begin | exclude |
include } regular-expression ]
Display OSPFv3 LSDB information.
display ospfv3 [ process-id ] lsdb [ [ external |
inter-prefix | inter-router | intra-prefix | link | network
| router ] [ link-state-id ] [ originate-router router-id ] |
total ] [ | { begin | exclude | include }
regular-expression ]