R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

781
Ste
p
Command Remarks
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Create an iBGP peer group.
group ipv6-group-name [ internal ]
N/A
5. Add a peer into the group.
peer ipv6-address group
ipv6-group-name [ as-number
as-number ]
Not added by default.
Creating a pure eBGP peer group
To configure a pure eBGP group:
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Create an eBGP peer group.
group ipv6-group-name external N/A
5. Configure the AS number for
the peer group.
peer ipv6-group-name as-number
as-number
Not configured by default.
6. Add an IPv6 peer into the
peer group.
peer ipv6-address group
ipv6-group-name
Not added by default.
NOTE:
• To create a pure EBGP peer group, you need to specify an AS number for the peer group.
• If a peer was added into an EBGP peer
g
roup, you cannot specify any AS number for the peer
g
roup.
Creating a mixed EBGP peer group
To create a mixed eBGP peer group:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Create an eBGP peer group. group ipv6-group-name external N/A
5. Specify the AS number of an
IPv6 peer.
peer ipv6-address as-number
as-number
Not specified by default.
6. Add the IPv6 peer into the
peer group.
peer ipv6-address group
ipv6-group-name
Not added by default.
NOTE:
W
hen creating a mixed EBGP peer
g
roup, you need to create a peer and specify its AS number that can
be different from AS numbers of other peers; however, you cannot specify AS number for the EBGP peer
group.