R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

894
3. Use the display mld interface command to verify that the MLD version on the interface is lower than
that on the host.
4. Use the display current-configuration interface command to verify that no ACL rule has been
configured to restrict the host from joining IPv6 multicast group G. If an IPv6 ACL is configured to
restrict the host from joining IPv6 multicast group G, the ACL must be modified to allow IPv6
multicast group G to receive report messages.
Inconsistent memberships on routers on the same subnet
Symptom
Different memberships are maintained on different MLD routers on the same subnet.
Analysis
• A router running MLD maintains multiple parameters for each interface, and these parameters
influence one another, forming very complicated relationships. Inconsistent MLD interface
parameter configurations for routers on the same subnet will surely result in inconsistent MLD
memberships.
• Two MLD versions are available. Although routers running different MLD versions are compatible
with hosts, all routers on the same subnet must run the same MLD version. Inconsistent MLD versions
running on routers on the same subnet will also lead to inconsistent MLD memberships.
Solution
1. Use the display current-configuration command to verify the MLD configuration on the interface.
2. Use the display mld interface command on all routers on the same subnet to check the MLD timers
for inconsistent configurations.
3. Use the display mld interface command to check that the routers are running the same MLD
version.