R3721-F3210-F3171-HP High-End Firewalls Network Management Configuration Guide-6PW101

901
Ste
p
Command Remarks
5. Match BGP routing information
whose AS path attribute is
specified in the AS path list (s).
if-match as-path AS-PATH-number&<1-16>
Optional.
Not configured by
default.
6. Match BGP routing information
whose community attribute is
specified in the community list(s).
if-match community
{ { basic-community-list-number |
comm-list-name } [ whole-match ] |
adv-community-list-number }&<1-16>
Optional.
Not configured by
default.
7. Match routes having the specified
cost.
if-match cost value
Optional.
Not configured by
default.
8. Match routing information having
specified outgoing interface(s).
if-match interface { interface-type
interface-number }&<1-16>
Optional.
Not configured by
default.
9. Match routing information having
the specified route type.
if-match route-type { external-type1 |
external-type1or2 | external-type2 |
internal | is-is-level-1 | is-is-level-2 |
nssa-external-type1 |
nssa-external-type1or2 |
nssa-external-type2 } *
Optional.
Not configured by
default.
Only F5000
supports the
is-is-level-1 and
is-is-level-2
keywords.
10. Match RIP, OSPF, and IS-IS routing
information having the specified
tag value.
if-match tag value
Optional.
Not configured by
default.
Defining apply clauses
To define apply clauses for a routing policy:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter routing policy view.
route-policy route-policy-name
{ deny | permit } node node-number
Not created by default.
3. Set the AS-PATH attribute for
BGP routing information.
apply as-path as-number&<1-10>
[ replace ]
Optional.
Not set by default.
4. Delete the community attribute
of BGP routing information
using the community list.
apply comm-list { comm-list-number
| comm-list-name } delete
Optional.
Not configured by default.
5. Set the community attribute for
BGP routing information.
apply community { none | additive
| { community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } *
[ additive ] }
Optional.
Not set by default.