R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

92
Use undo info-center console channel to restore the default console output channel.
By default, the system outputs information to the console through channel 0 (console).
The info-center console channel command takes effect only when the information center has been
enabled with the info-center enable command.
Examples
# Specify the console output channel as channel 0.
<Sysname> system-view
[Sysname] info-center console channel 0
info-center enable
Syntax
info-center enable
undo info-center enable
View
System view
Default level
2: System level
Parameters
None
Description
Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
The system outputs information to the log host or the console only after the information center has been
enabled.
By default, the information center is enabled.
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Info: Information center is enabled.
info-center format unicom
Syntax
info-center format unicom
undo info-center format
View
System view