R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

93
Default level
2: System level
Parameters
None
Description
Use info-center format unicom to set the UNICOM format for system information sent to a log host.
Use undo info-center format to restore the default.
By default, the format for the system information sent to a log host is HP.
System information sent to a log host has two formats: HP and UNICOM. For more information, see
System Management and Maintenance Configuration Guide.
Examples
# Set the UNICOM format for system information sent to a log host.
<Sysname> system-view
[Sysname] info-center format unicom
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center logbuffer [ channel | size ]
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For how to
configure a channel name, see info-center channel name.
buffersize: Specifies the maximum number of log messages that can be stored in a log buffer.
Description
Use info-center logbuffer to configure information output to the log buffer.
Use undo info-center logbuffer to disable information output to the log buffer.
By default, the system outputs information to the log buffer through channel 4 (logbuffer).
The info-center logbuffer command takes effect only after the information center has been enabled with
the info-center enable command.
All firewalls support the buffersize argument, but have different value ranges and default values:
Item F1000-A-EI/S-EI F1000-E F5000 Firewall module
Value range 0 to 1024 0 to 65535 0 to 65535 0 to 65535