R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

95
Default level
2: System level
Parameters
freq-sec: Specifies the interval for saving system information to the log file, in the range of 1 to 86,400
seconds.
Description
Use info-center logfile frequency to configure the interval for saving system information to the log file.
Use undo info-center logfile frequency to restore the default interval.
The default saving interval is 86,400 seconds.
The following matrix shows the command and firewall compatibility:
Command F1000-A-EI/S-EI F1000-E F5000 Firewall module
info-center logfile
frequency
No Yes Yes Yes
Examples
# Configure the interval for saving system information to the log file as 60,000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
info-center logfile overwrite-protection
Syntax
info-center logfile overwrite-protection
undo info-center logfile overwrite-protection
View
System view
Default level
2: System level
Parameters
None
Description
Use info-center logfile overwrite-protection to enable overwrite-protection for the log file. With this
feature enabled, new logs cannot overwrite existing logs in the log file when the log file capacity is
reached.
Use undo info-center logfile overwrite-protection to disable log file overwrite-protection.
By default, log file overwrite-protection is disabled.
The following matrix shows the command and firewall compatibility: