R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

100
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For how to
configure a channel name, see info-center channel name.
Description
Use info-center monitor channel to configure the monitor channel. The system uses this channel to output
information to the monitor.
Use undo info-center monitor channel to restore the default monitor output channel.
By default, the system outputs information to the monitor through channel 1.
The info-center monitor channel command takes effect only after the information center enabled with the
info-center enable command.
Examples
# Output system information to the monitor through channel 0.
<Sysname> system-view
[Sysname] info-center monitor channel 0
info-center security-logfile alarm-threshold
Syntax
info-center security-logfile alarm-threshold usage
undo info-center security-logfile alarm-threshold
View
System view
Default level
2: System level
Parameters
usage: Specifies the alarm threshold of the security log file usage. The value must be an integer that
ranges from 1 to 100.
Description
Use info-center security-logfile alarm-threshold to set the alarm threshold for security log file usage.
Use undo info-center security-logfile alarm-threshold to restore the default.
By default, the alarm threshold of the security log file usage is 80. That is, when the usage of the security
log file reaches 80%, the system informs the administrator.
When the size of the security log file reaches the upper limit, the system deletes the oldest information
and then writes the new information into the security log file buffer. This feature can avoid security log
loss by setting an alarm threshold. When the threshold is reached, the system outputs log information to
inform the administrator. The administrator can log in to the device as the security log administrator, and
back up the security log file.
Related commands: info-center security-logfile size-quota.
Examples
# Set the alarm threshold of the security log file usage to 90%.